Plug & Play Box For Analog Cameras
 |
Digital Video Alarm Sensor - for analoge cameras (1 or 2) in outdoor areas -
|
Intelligent Video Analysis
 |
3D-Video-Sensor (3D-Calculation based on the third dimension of the image) |
|
Configuration of sensitivity, direction of detection, fade out of light |
|
Raise an alert only by objects of defined size |
|
„electronic fence“ for ignoring not relevant areas |
- Eliminating most of the inconsequential activities in wide area analysis
- Capable to recognise relevant movements for an alarm e.g. intruders, vehicles
- Intelligent analysis and not only „pixel counting“ of common motion detection
- Reliable alerting especially in outdoor areas
Easy integration in new or existing analoge video surveillance systems:
- Runs on embedded system with designated IP-address using Linux OS
- Capable of connecting two analog cameras
- Viewer and configurator by web interface
- Pure alarm trigger-functionality for DVR, NVR or Video-Management-
Systems
| Software-Specification for Video Sensor |
| Input |
Analoge up to 2 cameras (BNC) |
| Video standard |
NTSC / PAL |
| Image size/ resolution |
NTSC: 320 x 240, 640 x 480
PAL / CIF: 384 x 288, 768 x 576 |
| Frames per second |
mind. 5 Pictures / sec (5 FPS)
max. 25 Pictures / sec (25 FPS) |
| Interfaces |
4 inputs (Alarm)
4 outputs (Alarm, open collector)
Eventkonfiguration over IP |
| Viewer |
via Web Broser |
| Recording |
Trigger of 3rd party systems (DVR, NVR, …) |
| Compression |
JPEG |
| Storage |
via 3rd party systems (DVR, NVR, …) |
| Operating mode |
Triplex |
| Remote Control |
via Web Browser |
| Password |
yes |
| Configuration |
via Web-Browser |
| Sensor |
Camera selective settings, 3D Sensor, full image
analysis, electronic fence to eliminate not
relevant areas,
2 level sensor for indoor and outdoor,
Automatic blocking of areas out of the detection
area, ignores object sizes that are to small
or to large. |
| Action |
Setting of alarm inputs via relay contacts,
trigger via TCP/IP on 3rd party systems,
Integrated Event-Management (ftp, email, http),
PTZ control |
| Storage |
Motion trigger via DVR, NVR (3rd party systems)
in various fps and resolutions*,
Saves the images of the last alarm in the
sensor: pre-alarm images, alarm images,
protocol images |
| Display |
via web browser / V.A.S. PC-Client or 3rd party
systems
|
|
* by integration to 3rd party systems
(DVR, NVR, GENETEC, milestone, NetAVIS, SeeTec, …) |
 |
|
| Hardware-Specification |
| Operating System |
OS Linux auf μCPU (ETRAX 100 LX) |
| Specification of HW |
10 / 100 BaseTX Fast Ethernet
2 x BNC
RS 232 serial Port
2 x 4 I / O
μCPU (ETRAX 100 LX)
Power 9-24 VAC (or DC), 9,6 VA
Power consumption 2,8-3,2 VA
Temperature +5°C until +50°C
Humidity: 8-80% RHG |
|
| Distribution |
Please contact:
viasys IV GmbH
Werner-Heisenberg-Str. 4
D – 63263 Neu-Isenburg
Diese E-Mail-Adresse ist gegen Spambots geschützt! Sie müssen JavaScript aktivieren, damit Sie sie sehen können.
Phone +49 6102 - 364668
Fax +49 6102 - 364680 |
|
